LR-PS-LINE-95P-HX2/HF2

You are here: » Home » Products » Mattress Innerspring Units Production Line » LR-PS-LINE-95P-HX2/HF2
LR-PS-LINE-95P-HX2/HF2 Fully automatic pocket spring production line
LR-PS-LINE-95P-HX2/HF2 Fully automatic pocket spring production line
LR-PS-LINE-95P-HX2/HF2 Fully automatic pocket spring production line
LR-PS-LINE-95P-HX2/HF2 Fully automatic pocket spring production line
LR-PS-LINE-95P-HX2/HF2 Fully automatic pocket spring production line
LR-PS-LINE-95P-HX2/HF2 Fully automatic pocket spring production line
LR-PS-LINE-95P-HX2/HF2 Fully automatic pocket spring production line
LR-PS-LINE-95P-HX2/HF2 Fully automatic pocket spring production line

Technical characteristics:

LR-PS-LINE-95P-HX2/HF2 Fully automatic pocket spring production line
· Two electronically controlled coiling heads
· Independent ultrasonic cutting device for pocket spring strings.
· Smart conveyor for pocket spring strings
· Shock-proof and interference-proof system for electronic components.
· Accurate servo spring conveyor system.
· Intelligently automatic alarm system.
· Flexible heat treatment device.
· Smart joint device for non-woven fabric roll.
· Various customized ultrasonic welding seam .
· Only one operator is required
Option 1: LR-PS-HX2
· Two electronically controlled coiling heads.
· Computerized spring dimension setting system.
· Computerized various spring data saving system.
Special Option, if desired:
· Zoning pocket spring is possible with two different steel wires.
· Available for springs in hour-glass shape, pyramid shape, PPS type and so on.
Option 2: LR-PS-HF2
· Two mechanical coiling heads.

Technical Specification:

Performance
Production capacity 6 mins / unit
General Data
Spring type Barrel
Cylindrical
Mattress width 300 ~ 2150mm
Air consumption Approx. 30 m3 / h
Air pressure 0.6 ~ 0.7 mpa
Power consumption in total Approx. 20KVA 26KW
Power requirements： Voltage 3AC 380V
Frequency 50 / 60 Hz
Input fuse 50 A
Cable section 4 × 16 mm2
Working temperature + 5℃ ~ + 45℃
Weight Approx. 8000 kg
Consumption Material Data
Non-woven Fabric（pocket spring）
Fabric density 65 ~ 90 g / m2
Fabric width 350 ~ 600 mm
Inner diameter Of fabric roll Min. 65 mm
Outside diameter of fabric roll Max. 600 mm
Non-woven Fabric（ top & bottom）
Fabric density 65 ~ 90 g / m2
Fabric width 300 ~ 2200 mm
Inner diameter Of fabric roll Min. 65 mm
Outside diameter of fabric roll Max. 600 mm
Steel wire
Wire gauge 1.6 ~ 2.1 mm
Inner diameter of wire roll Min. 350 mm
Outside diameter of wire roll Max. 1000mm
Acceptable weight of wire roll Max. 800kg
Hot melt glue
Fabric density pellet or pieces
Viscosity

125℃ --- 6100cps
150℃ --- 2300cps
175℃ --- 1100cps

Ring and Ball softening point 85±5℃